¤ Our Products - Membrane Separation System

Our range of products include Membrane Separation System such as Reverse Osmosis, Ultra Filtration, Micro Filtration Plants, Nano Filtration Plant and Sea Water Desalination.

• Reverse Osmosis

Reverse Osmosis (RO) is a physical separation process in which properly pretreated source water is delivered at moderate pressure against a semi-permeable membrane. The membrane rejects most solute ions and molecules, while allowing water of very low mineral content to pass through. This process also works as an absolute barrier for crysts and most viruses. The process produces a concentrated reject stream in addition to the clean permeate product. Byproduct water or the "concentrate" may range from 10% to 60% of the raw water pumped to the reverse osmosis unit. For most brakish waters & ionic contaminant removal applications, the concentrate is in the 10-25% range while for sea water it could be as high as 60%. Typical RO/NF elements are in spiral wound element configuration, while EDR is in stacks containing membrane sheets.

We supply Reverse Osmosis Plants of 100 LPH to 50 m3/hr capacity of various applications like

* Drinking Water
* Bottling water application
* Paper & Pulp
* Power Generation
* Edible Oil Refineries
* Commercial Establishments & Residential Colonies
* Chemical & Pharmaceutical Industries
* Food & Beverage Processing Industries

We supply RO Plants in completely enclosed cabinates and containerised design also.

• Ultra Filtration

Ultra-filtration plants can be constructed by employing hollow fibre membranes or spiral wound membranes. They work with a pressure of about 1-10 bar and they are suitable to separate big molecules present in water. The ultra filtration plants have established a position in the drinking water sector due to the fact that they filter water to such an extent that it is virtually free of solids. Bacteria, parasites and viruses are not killed off, but entirely removed from the drinking water.

• Micro Filtration Plants

Micro-filtration plants can be constructed by using hollow fibre membranes or spiral wound membranes. In case of special applications it is possible to use ceramic membranes.

• Nano Filtration Plant

Nano filtration plant are generally constructed by installing hollow fibre membranes or spiral wound membranes. They have a medium-high working pressure (4-30 bar) and they are normally used to reduce water hardness, to recover salts from dying baths, to remove colour and to recover acids and caustic soda.

• Sea Water Desalination

Desalination is the process of removing salt and other impurities from water and rendering it fit for human consumption. Seawater has a high percentage of salt whereas pure drinkable water should ideally contain less than 10 ppm of salt.

• Environmental Consultancy for Water & Waste Water Treatment

Inditron Enterprises offers a wide range of technical consultancy solutions for waste water treatment applications. Our technical expertise helps clients achieve waste water related efficiency, compliance & sustainable business success in highly regulated industries. To determine optimal solutions for waste water treatment applications, Inditron Enterprises offers analysis of each specific solution.